Towballs, Wiring Kits, and Towbar Accessories

50mm Towball zinc plated gold finish
EC Type Approved 3.5 Tonne Capacity (A50-X,D=17.2kN, S=270kg} 0
2 bolt flange at 3.5" centres

EC Approved towball with extended neck for Alko, Winterhoff and other stabilisers.
(A50-X, D=17.2kN, S=200kg)
When using with hitch head stabilisers, the paint must be removed from the ball and it should be free of grease or the pads will be contaminated.

PCT Combined Coupling with a 50mm ball and 1" pin & jaw. It has a towing capacity of 3500kg. The ball is separate from the pin. It is EC type approved with a silver plated finish. Please check that it is permissable to use this type of coupling with your vehicle before purchasing.
(A50-X, D=20.0kN, S=350kg)

Witter Combined Coupling with a 50mm ball and 1" pin & jaw. It has a towing capacity of 3500kg. The ball is separate from the pin. It is EC type approved with a black finish. Please check that it is permissable to use this type of coupling with your vehicle before purchasing.

Adjustable height coupling mounting
Provides 150mm of adjustment in 50mm increments.
The slider has six pre drilled holes to accept towing couplings with either 2 hole fixing (BS Au 11a) or 4 hole fixing (BS Au24).
The base plate has four pairs of holes spaced at 45mm with 3.5" centres

The slider is simply secured in place by two 19mm dia steel pins and lynch pins, no need for tools at all!

Any one towball, universal coupling, jaw or pintle can be fitted to the adjustable's slider for the ultimate in versatility!

Towpin 5/8"/16mm diameter 6.5"/165mm long
Useable length 6"/150mm
Comes with lynch pin
Useful for connecting garden trailers to lawn tractors and quad bikes
Not for highway use

Towpin 3/4"/19mm diameter 4.5"/110mm long
Useable length 3.75"/95mm
Comes with lynch pin
Useful for connecting garden trailers to lawn tractors and quad bikes
Not for highway use

12N Single Pre-wired socket with 1.6m 7 core cable on mounting plate to suit flange ball towbars. Supplied with full instructions, audible rear end flasher relay, scotchlock type connectors & grommet.
Suits vehicles with simple wiring systems. For vehicles with canbus and multiplex wiring systems, use a wiring kit with a bypass relay or a vehicle specific kit.
If in doubt as to whether this kit is suitable for your vehicle, please ask.
Contents may vary from picture

12N Single Pre-wired socket with 1.6m 7 core cable on mounting plate to suit flange ball towbars. Supplied with full instructions, 7 way bypass relay, extra wiring, scotchlock type connectors & grommet.
Suits vehicles with with canbus and multiplex wiring systems. Can be used with vehicles with simple electrical systems but not necessary.
For vehicles with safety critical systems, use a vehicle specific kit.
If in doubt as to whether this kit is suitable for your vehicle, please ask.
Contents may vary from picture

12N/12S twin pre-wired sockets with 1.6m 7 core cable on tee mounting plate to suit flange ball towbars.
Manufactured by Ryder Towing, the industry experts and used in our workshops
Comes with 7 way bypass relay and self switching fridge/battery charging relay
Supplied with full instructions, extra wiring, scotchlock type connectors & grommet.
Suits vehicles with with canbus and multiplex wiring systems.
Can be used with vehicles with simple electrical systems but not necessary.
For vehicles with safety critical systems, use a vehicle specific kit.
If in doubt as to whether this kit is suitable for your vehicle, please ask.
Contents may vary from picture

Black plastic socket cover