Witter Cycle Carriers

The ZX100 can be mounted to the vehicle's roof bars, square or aero to provide secure and safe transport for one cycle.

Smart, aerodynamic design.
Lightweight aluminium body.
Easy adjust wheel holders to fit most cycle types.
Quick load and release with ratchet wheel securing straps.
Cycle frames protected with soft rubber holders.
Additional frame holders supplied for differing frame shapes.
Lockable frame holder.
Carrier can be mounted on both steel and aluminium roof bars.
Maximum payload 15kg

The ZX200 platform style cycle carrier from Witter takes up to two cycles of any size including a child’s and the whole platform will fold down allowing access to the car luggage compartment even with bikes loaded.

Easy coupling fits most towbars
Tilts with cycles loaded for easy access to vehicle boot
Cycles easy to load/unload
Outer cycle held by individual fixed arm avoids contact between cycles
Additional robust nylon strap fastens cycles to carrier.
Adjustable wheel holders accommodate most cycle sizes (inc. kids)
Light board with 13 pin plug and 7 pin adaptor
Initial assembly takes approx 20 minutes
Maximum payload 34kg


Vehicle Application List

The ZX300 platform style cycle carrier from Witter takes up to three cycles of any size including a child’s and the whole platform will fold down allowing access to the car luggage compartment even with bikes loaded.

Easy coupling fits most towbars
Tilts with cycles loaded for easy access to vehicle boot
Cycles easy to load/unload
Outer two cycles held by individual fixed arm avoids contact between cycles
Additional robust nylon strap fastens cycles to carrier.
Adjustable wheel holders accommodate most cycle sizes (inc. kids)
Light board with 13 pin plug and 7 pin adaptor
Initial assembly takes approx 20 minutes
Maximum payload 51kg


Vehicle Application List

The ZX400 platform style cycle carrier from Witter takes up to four cycles and the whole platform will tilt down allowing access to the car luggage compartment even with bikes loaded. The ZX400 is compatible with flange ball type towbars

Carries up to 4 bikes maximum 65kg
Permanent mounting plate for use with flange towbars.
Initial set-up time 20mins
Easy-fit carrier hooks to mount plate
Carrier weighs 23kg
Quick-pin locators secure carrier to mount plate
Adjustable wheel holders with slide straps ensure fit for all bike sizes
Quick release ratchet straps secure bike wheels to carrier
Rigid cycle securing arms hold bike frames safely apart
Soft rubber bike frame holders
Easy to load platform height
ZX400 fits perfectly every time, no towball adjustments required
Folds flat for storage when not in use
Mounts to car in seconds (after initial set-up)
Bikes can be locked to carrier and vehicle using security loop on mount plate (cable lock not provided)
Tested and approved to EU standards
The cycles are supported on the wheels as opposed to hanging from the cycle cross bar
The innovative tilt and fold design allows access to the boot even with the cycles in place
Carry any size bicycle including children’s
Moulded feet well spaced for stability
Feet and straps are simple to adjust
Complete with lighting board with UK 7 pin connector
Vehicle Application List

Very easy to use, takes seconds to install (once base plate has been fitted). This is capable of carrying up to 4 cycles and is suitable for most popular vehicles without a rear mounted spare wheel. It comes with elastic straps for securing the bicycles and an additional support for use when carrying four bikes. You can tow and carry bikes at the same time provided nose weight limits are not exceeded.

We recommend the use of a light board if the lights or number plate of the vehicle are obscured (not applicable when towing).
Not for swanneck style towbars (can be used with swan to flange adaptor).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.


Vehicle Application List

This carrier is similar to the ZX88 but carries three bikes on three pairs of adjustable clamps(upgradable to carry 4 cycles for an extra £8.62 - subject to noseweight limits - check box to add to order)
For vehicles without spare wheel on the rear door/tailgate
No requirement for multiple straps that cling to the vehicle.
The weight of the cycles is fully supported by the towbar.
Durable powder coat finish
Easy to store.
Supplied with full comprehensive fitting instructions

Not for swanneck style towbars (can be used with swan to flange adaptor - towing not possible).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.


Vehicle Application List

Low number on vehicle?

As ZX88, suitable for up to 4 cycles and fits to vehicles with a rear mounted spare wheel with an overhang of up to 110mm E.g. Land Rover Discovery.

Not for swanneck style towbars (can be used with swan to flange adaptor - towing not possible).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.

Vehicle Application List

As ZX89 but suitable for vehicles with a spare wheel overhang of up to 110mm E.g. Land Rover Discovery.
Holds up to 3 cycles (upgradable to carry 4 cycles for an extra £8.62 - subject to noseweight limits - check box to add to order)

Not for swanneck style towbars (can be used with swan to flange adaptor - towing not possible).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.


Vehicle Application List

As ZX88, suitable for vehicles with a rear mounted spare wheel with a large overhang of up to 187mm E.g. Mitsubishi Shogun, Land Rover Freelander Mk 1.

Not for swanneck style towbars (can be used with swan to flange adaptor - towing not possible).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.

Vehicle Application List

As ZX89 but suitable for vehicles with a spare wheel overhang of up to 187mm Eg. Mitsubishi Shogun, Land Rover Freelander Mk 1.
Holds up to 3 cycles (upgradable to carry 4 cycles for an extra £8.62 - subject to noseweight limits - check box to add to order)

Not for swanneck style towbars (can be used with swan to flange adaptor - towing not possible).
If you have a low number plate fitted to your vehicle that might be affected by the car plate, please select "low number plate" in the drop down menu. We will swap the car plate for the low version at no extra cost.

Vehicle Application List

Spare car plate that can be bolted to an additional vehicle with a flange ball towbar. This gives you the convenience of being able to transfer the Cycle Carrier from one vehicle to another

This car plate should be used when the standard ZX88/A base plate obscures the number plate.

This spare base plate can be bolted to an additional vehicle with a flange ball towbar. This gives you the convenience of being able to transfer the cycle carrier from one vehicle to another.

This car plate should be used when the standard ZX98/A base plate obscures the vehicle number plate.

This very handy accessory bolts to a wall and the Cycle Carrier arms sit on top. This allows you to then store your bikes on the Cycle Carrier arms. A facility to chain and padlock your bikes to the ZX64 bracket is provided.

Each pack contains a matched pair of clamps

Straight pole ZX88 & ZX89 Witter cycle carriers

Spare pole with single crank for ZX98 & ZX99 Witter cycle carriers

Spare pole with double crank for ZX108 & ZX109 Witter cycle carriers

Spare twin arm top assembly for ZX88 ZX98 & ZX108 Witter cycle carriers
Arms have protective rubber sleeves

Spare twin arm top assembly for ZX89 ZX99 & ZX109 Witter cycle carriers
Plain arms without rubber sleeves to accept clamps

Replacement cycle carrier steady strap.
Complete with boot bobbin, paintwork protector and cycle carrier cam buckle

Pack of three additional bungee straps
Colour may vary from the picture

Replacement rubber weather cover.
Suits all Witter cycle carrier base plates

The Clam Shell Adaptor allows you to use your existing Witter, Pendle or any other flange ball type cycle carrier with a swan neck or detachable ball towbar. Very quick and easy to use. It takes less than a minute to attach with a 19mm spanner. Very secure once tightened.
Please note: it can't be used whilst towing.
Requires 2 x M16 bolts - can be purchased as an optional extra - please check the box

This 3 ft light board is designed to be used with cycle carriers only. It has a short lead and the legally required reflectors which do differ from those required on trailers and caravans. Please be aware that it is illegal to obscure the lights and number plate on a road going vehicle and it is therefore likely that a light board will be required if using a cycle carrier. Penalties for non compliance are high.

A new board to our range. This one is yellow, 4ft wide and has 2m cable

This light board has 2m cable and is 4'6" wide making it particularly suitable for larger vehicles carrying cycles.It also has a fog light.

A pair of quick release number plate mountings.
Allows the use of different number plates quickly & easily without tools.
Will fit on any flat surface.
Stainless steel

Number plate holder
Allows the use of different number plates quickly & easily without tools.
Will fit on any standard plastic light board or over timber up to 3/4"/20mm thick
White powder coated steel