Other Cycle Carriers & Accessories

The base-rak fits onto any sort of 50mm tow-ball - swan-neck or flanged in seconds and without any fuss. A clever stainless steel clam-shell casting clips over the ball - the rack simply slips over this and tighten the clamp to secure the base. It provides an extremely rigid 800 x 600 mm platform that allows a whole range of accessories to be fitted as well as the bike racks.
Comes with one adjustable cycle carrier that U bolts on to the base. This can be removed to allow the base to be used for a multitude of other load carrying purposes.
Can be upgraded to 2 or 3 bikes by adding more cycle carriers, and 4 or 5 bikes by adding more carriers, a set of Xtender bars, and two load straps.
Please check that you do not exceed the towbar noseweight limit (S Value)
Picture shows rack with three carriers fitted.
We advise the use of a light board if the lights of the vehicle and/or number plate is obscured.
These can be purchased as an optional extra.

The Clam Shell Adaptor allows you to use your existing Witter, Pendle or any other flange ball type cycle carrier with a swan neck or detachable ball towbar. Very quick and easy to use. It takes less than a minute to attach with a 19mm spanner. Very secure once tightened.
Please note: it can't be used whilst towing.
Requires 2 x M16 bolts - can be purchased as an optional extra - please check the box

The Maypole 2 bike carrier is very quick and easy to use. It simply clamps around the towball and is very secure. It is not possible to tow at the same time. This is ideal for park and commute as it is lightweight carrier that can easily be stored in the boot when not being used

The Westfalia 2 bike carrier allows you to carry bikes safely and securely on the C1, 107 and Aygo.
There is no towbar available for these models so Westfalia have designed a carrier that mounts to brackets fitted to the chassis and is very quick and easy to use .
The mountings are bolted to existing holes and the kit also includes a wiring kit.
The installation of these components is only done once.
This is ideal for park and commute as it is a lightweight carrier that can easily be stored in the boot when not being used.
Carrying capacity 40kg

The Thule 2 bike carrier is very quick and easy to use.
It simply clamps around the towball and is very secure.
It is not possible to tow at the same time.

Lightboard included for increased satefy and compliance with legal requirements
Smart coupling, fits most towbars.
Straps for securing of the bikes are included.
The bike carrier tilts back, giving boot access without off-loading the bikes

Packaging is slightly tatty so only one available at this price
Thule fitting instructions and specifications

The Thule 3 bike carrier is very quick and easy to use.
It simply clamps around the towball and is very secure.
It is not possible to tow at the same time.

Lightboard included for increased satefy and compliance with legal requirements
Smart coupling, fits most towbars.
Straps for securing of the bikes are included.
The bike carrier tilts back, giving boot access without off-loading the bikes

Packaging is slightly tatty so only one available at this price
Thule fitting instructions and specifications

Automaxi upright cycle carrier for roof bars, trailer load rails & the Bak-Rak G3 base. The length is adjustable and it comes with two straps to secure the wheels.

Erde lightweight upright cycle carrier for roof bars, trailer load rails & the Bak-Rak G3/G4 base.
The wheel channel is made of a one piece alloy extrusion
Comes with two straps to secure the wheels.

Fits with easy to use hand wheels - no spanners needed
Has locking knob to prevent unauthorised cycle removal

Shown mounted on a G3 Bak-rak (not included)

Towbar mounted bike racks are a secure and easy way of carrying light off road bikes such as trials bikes and junior bikes. Easily fitted to any standard flange ball towbar, these racks are fully adjustable and built to a very high standard. Available with a galvanised finish, these racks have been the benchmark by which others have set their standard for years

This 3 ft light board is designed to be used with cycle carriers only. It has a short lead and the legally required reflectors which do differ from those required on trailers and caravans. Please be aware that it is illegal to obscure the lights and number plate on a road going vehicle and it is therefore likely that a light board will be required if using a cycle carrier. Penalties for non compliance are high.

A new board to our range. This one is yellow, 4ft wide and has 2m cable

This light board has 2m cable and is 4'6" wide making it particularly suitable for larger vehicles carrying cycles.It also has a fog light.

A pair of quick release number plate mountings.
Allows the use of different number plates quickly & easily without tools.
Will fit on any flat surface.
Stainless steel

Number plate holder
Allows the use of different number plates quickly & easily without tools.
Will fit on any standard plastic light board or over timber up to 3/4"/20mm thick
White powder coated steel