Very good value, easy to use carriers. Used by our own staff for many years, this is by far our best selling
carrier. Comes in two versions with three models of each.
ZX88 ZX98 ZX108
Base Plates for low level number plates
Very easy to use, takes seconds to install (once base plate has been fitted). This is capable of carrying up to 4
cycles and is suitable for most popular vehicles with or without a rear mounted spare wheel. It comes with
elastic straps for securing the bicycles and an additional support for use when carrying four bikes. You can tow
and carry bikes at the same time provided nose weight limits are not exceeded. We recommend the use of a light
board if the lights or number plate of the vehicle are obscured (not applicable when towing).
ZX89
ZX99
ZX109
Pair of Clamps
As ZX88/98/108 but complete with 3 pairs of multi-angle cycle attachment clamps and a "bungee" cord with
hooks to secure wheels. Can be upgraded to four bikes with an additional pair of clamps.
Can be used with swan neck style towbars in conjunction with clam shell adaptor but you cannot tow at the same
time.
ZX88/89
For vehicles without spare wheel on the
rear door/tailgate.
The ZX88 will carry up to 4 bikes and a
maximum load of 65kg. You can tow
and carry bikes at the same time
subject to drawbar clearance and
noseweight restrictions.
The ZX89 is identical to the 88 but
carries 3 bikes on three pairs of
adjustable clamps. Can be upgraded to
four bikes by purchasing an additional
pair of clamps.
Both versions include a support strap
for use when carrying three or four
bikes
For use with flange ball towbars but can
used on any towbar including swan
necks with the swan to flange adaptor.
ZX88 £47.50 + VAT = £57.00 inc VAT
ZX89 £52.95 + VAT = £63.54 inc VAT
Pair of clamps £9.00 inc VAT
Swan to Flange adaptor £30.00 inc VAT
ZX98/99
As ZX88/89 but for vehicles with a
spare wheel on the rear door/tailgate
Suits Land Rover Discovery & similar
vehicles with up to 110mm of spare
wheel overhang.
ZX98 £65.00 + VAT = £78.00 inc VAT
ZX99 £75.00 + VAT = £90.00 inc VAT
Pair of clamps £9.00 inc VAT
Swan to Flange adaptor £30.00 inc VAT
ZX108/109
As ZX98/99 but for vehicles with a
spare wheel overhang of up to 187mm
of spare wheel overhang.
ZX108 £70.00 + VAT = £84.00 inc VAT
ZX109 £79.95 + VAT = £95.94 inc VAT
Pair of clamps £9.00 inc VAT
Swan to Flange adaptor £30.00 inc VAT
Accessories
Pair of clamps £9.00 inc VAT
Swan to Flange adaptor £30.00 inc VAT
3’ Light Board
£14.25
4’ Light Board
£19.95
4’6” Light Board £23.95
Quick Release Number Plate Mounting
Brackets
£7.15
ZX88A Standard Car Plate £28.20
ZX78A Standard Car Plate for vehicles
with low number plates £24.00
ZX98A Angled Car Plate £33.00
ZX97A Angled Car Plate for vehicles
with low number plates £33.00
ZX64 Garage Wall Bracket
£30.62
To find out which carrier is the one for your
vehicle please click on the button below
Prices include VAT @ 20% and subject to change without notice
E. & O. E.
Now available, the new range of wheel support carriers with stylish built in lights
ZX200
Cycle Carrier OVERVIEW
The ZX200 platform style cycle carrier from
Witter takes up to two cycles of any size
including a child’s and the whole platform will
fold down allowing access to the car luggage
compartment even with bikes loaded.
MORE DETAILS
•
Easy coupling fits most towbars
•
Tilts with cycles loaded for easy access to
vehicle boot
•
Cycles easy to load/unload
•
Outer cycle held by individual fixed arm
avoids contact between cycles
•
Additional robust nylon strap fastens cycles
to carrier.
•
Adjustable wheel holders accommodate
most cycle sizes (inc. kids)
•
Light board with 13 pin plug and 7 pin
adaptor
•
Initial assembly approx 30 minutes
•
Maximum payload – 34kg
•
£132.00
ZX300
Cycle Carrier OVERVIEW
The ZX300 platform style cycle carrier from
Witter takes up to three cycles of any size
including a child’s and the whole platform will
fold down allowing access to the car luggage
compartment even with bikes loaded.
MORE DETAILS
•
Easy coupling fits most towbars
•
Tilts with cycles loaded for easy access to
vehicle boot
•
Cycles easy to load/unload
•
Outer two cycles held by individual fixed
arms which avoids contact between cycles
•
Additional robust nylon strap fastens cycles
to carrier.
•
Adjustable wheel holders accommodate most
cycle sizes (inc. kids)
•
Light board with 13 pin plug and 7 pin
adaptor
•
Initial assembly approx 40 minutes
•
Maximum payload – 51kg
•
£155.94
ZX404
Cycle Carrier OVERVIEW
The ZX404 platform style cycle carrier from Witter takes
up to four cycles and the whole platform will tilt down
allowing access to the car luggage compartment even
with bikes loaded. The ZX400 is only suitable for flange
ball type towbars.
MORE DETAILS
•
Carries up to 4 bikes maximum 65kg
•
Permanent mounting plate for use with flange
towbars.
•
Initial set-up time 20mins
•
Easy-fit carrier hooks to mounting plate
•
Carrier weighs 19kg
•
Quick-pin locators secure carrier to mounting
plate
•
Adjustable wheel holders with slide straps
ensure fit for all bike sizes
•
Quick release ratchet straps secure bike wheels
to carrier
•
Rigid cycle securing arms hold bike frames
safely apart
•
Soft rubber bike frame holders
•
Easy to load platform height
•
ZX404 fits perfectly every time, no towball
adjustments required
•
Folds flat for storage when not in use
•
Mounts to car in seconds (after initial set-up)
•
Bikes can be locked to carrier and vehicle using
security loop on mount plate (cable lock not
provided)
•
Tested and approved to EU standards
•
The cycles are supported on the wheels as
opposed to hanging from the cycle cross bar
•
The innovative tilt and fold design allows
access to the boot even with the cycles in place
•
Carry any size bicycle including children’s
•
Moulded feet well spaced for stability
•
Feet and straps are simple to adjust
•
Complete with lighting board with UK 7 pin
connector
£395.00
ZX100
Cycle Carrier OVERVIEW
The ZX100 can be mounted to the vehicle's roof bars, square or aero to provide secure and safe transport for
one cycle.
MORE DETAILS
•
Smart, aerodynamic design.
•
Lightweight aluminium body.
•
Easy adjust wheel holders to fit most cycle types.
•
Quick load and release with ratchet wheel securing
straps.
•
Cycle frames protected with soft rubber holders.
•
Additional frame holders supplied for differing frame
shapes.
•
Lockable frame holder.
•
Carrier can be mounted on both steel and aluminium roof bars.
•
Maximum payload – 15kg
£45.54