Language: English

Currency: Pound Sterling

Wilmond Engineering Co Ltd.

Shopping Cart:

0 / £0.00

Your shopping cart is empty!

Categories

Manufacturers

Boat Trailer Rubbers & Brackets

Display:

List
Show:
Sort By:
12" Support Tube
12" Support Tube
12" long 34mm Support Tube for Roller Brackets ..

18" Support Tube
18" Support Tube
18" long 34mm Support Tube for Roller Brackets ..

24" Support Tube
24" Support Tube
24" long 34mm Support Tube for Roller Brackets ..

Bracket for Support Tubes
Bracket for Support Tubes
Bracket for 34mm Support Tubes ..

Humpback Block 3.5" Centres
Humpback Block 3.5" Centres
Humpback Block with two M10 threaded inserts at 3.5" centres ..

Humpback Block 4" Centres
Humpback Block 4" Centres
Humpback Block with two M10 threaded inserts at 4" centres ..

Bow Snubber Rubber
Bow Snubber Rubber
Bow Snubber Rubber. Can be used as a flat block or shaped to fit around bow. Also possible to cut..

Mounting for Roller Brackets
Mounting for Roller Brackets
Mounting for roller brackets suits up to 75mm/3" square tube. Requires appropriate U bolt Will ..

3.5" Bobbin Roller
3.5" Bobbin Roller
3.5" Bobbin Roller with 10mm bore ..

3.5" Roller Bracket
3.5" Roller Bracket
3.5" Roller Bracket for rollers with 10mm bore ..

5" V Roller with 16mm Bore
5" V Roller with 16mm Bore
5" V Roller with 16mm bore for supporting the keel ..

5" V Roller with 19mm Bore
5" V Roller with 19mm Bore
5" V Roller with 19mm bore for supporting the keel ..

5" Roller Bracket with 19mm Pin
5" Roller Bracket with 19mm Pin
Roller Bracket for 5" 'V' & Bobbin Rollers with 19mm bore ..

5" Keel Roller with 16mm Bore Non Marking
5" Keel Roller with 16mm Bore Non Marking
5" Keel Roller with 16mm bore non marking. ..

5" Bobbin Roller with 16mm Bore
5" Bobbin Roller with 16mm Bore
5" Bobbin Roller with 16mm bore ..

5" Roller Bracket with 16mm Pin
5" Roller Bracket with 16mm Pin
Roller Bracket for 5" 'V' & Bobbin Rollers with 16mm bore ..

5" End Roller Bracket with 16mm Pin
5" End Roller Bracket with 16mm Pin
End Roller Bracket for 5" 'V' & Bobbin Rollers with 16mm bore ..

5" End Roller Bracket with 19mm Pin
5" End Roller Bracket with 19mm Pin
End Roller Bracket for 5" 'V' & Bobbin Rollers with 19mm bore ..

8" V Roller Non Marking Blue with 21mm Bore
8" V Roller Non Marking Blue with 21mm Bore
8" V Roller for supporting the keel. Non marking blue plastic 21mm bore ..

8" Rubber V Roller with 19mm Bore
8" Rubber V Roller with 19mm Bore
8" Rubber V Roller with 19mm bore for supporting the keel. ..

8" x 2.25" Side Roller
8" x 2.25" Side Roller
8" x 2.25" Side Roller for supporting the hull. ..

8" V Roller Non Marking Blue with 16mm Bore
8" V Roller Non Marking Blue with 16mm Bore
8" V Roller for supporting the keel. Non marking blue plastic 16mm bore ..

8" Roller Bracket
8" Roller Bracket
Roller Bracket for 8" 'V' Roller ..

8" Side Roller Bracket
8" Side Roller Bracket
8" Side Roller Bracket for 8" x 1.75" & 2.25" Rollers ..

3.5" Castor Roller
3.5" Castor Roller
3.5" Castor Roller ..

4" Single Side Roller
4" Single Side Roller
4" Single Side Roller for supporting the hull (two required each side with brackets) ..

Bracket for 3.5" Castor Rollers
Bracket for 3.5" Castor Rollers
Bracket to mount four 3.5" single castor rollers (two each side) (not included) ..

4" Double Dumbell Roller
4" Double Dumbell Roller
4" Double Dumbell Roller for supporting the hull (two required each side with brackets) ..

Bracket for 4" Single Side Rollers
Bracket for 4" Single Side Rollers
Bracket to mount two 4" single side rollers (not included) ..

Bracket for 4" Double Dumbbell Rollers
Bracket for 4" Double Dumbbell Rollers
Bracket to mount two 4" Double Dumbbell Rollers (not included) ..

Ribbed Rubber Roller
Ribbed Rubber Roller
Rubber ribbed roller with 31mm bore ..

Ribbed  Roller Bracket Straight
Ribbed Roller Bracket Straight
Straight bracket for ribbed rollers (rollers not included) ..

Ribbed  Roller Bracket Cranked
Ribbed Roller Bracket Cranked
Cranked bracket for ribbed rollers (rollers not included) ..

8" Rubber Buffer Block
8" Rubber Buffer Block
Rubber Buffer Block 8"/200mm long with mounting hole centres of 4.5"/115mm ..

12" Rubber Buffer Block
12" Rubber Buffer Block
Rubber Buffer Block 12"/300mm long with 3 mounting holes with centres of 4"/102mm ..

Boat Trailer Winch Post with Bow Snubber Bracket
Boat Trailer Winch Post with Bow Snubber Bracket
Boat trailer winch post and bow snubber bracket.with 19mm pin. Winch plate is 120mm x 60mm and ..
£49.95
Ex Tax: £41.63